<< Wood stove 薪ストーブ #2 2021-03-25 | Making a deck 人工木材デッキ #1 >> 2021-03-31 |
春が来ます!やっと!ということは家の周りにある林をきれいにしたいですので、バードハウスを作ります。
A quick project to brighten up the outside of the house, now that I am starting to turn my attention to the deck (not built yet!) and garden (also not built yet!). With spring on the way..... sometime?...... I wanted to make some little birdhouses.
▲ バードハウスのかわいいデザインをネットで見つけて、3Dプリンターで3個も作りました。プラスチック材料は1個約500円でできましたので、安かったですね。
I 3D-printed these cute little birdhouses for about 500 yen each, from a free design I found on Thingiverse.com
▲ 家も赤にペイントするつもりですので、バードハウスもマッチするようにペイントしました。
I used some red house paint to make them two-tone, so they'll eventually match the house.
▲ できるだけ窓から見えるところに配置しました。1個目は2階のソファから見えます!
This first birdhouse is located on the big cedarpine tree right outside the side of the house, so I can see it from the 2nd floor living room sofa.
▲ 2個目は1階のホールから見えるところです。
The second birdhouse is also at the side of the house, visible from the 1st floor hall window.
▲ 3個目は玄関の読書スペースの新しい窓から見えます。ラッキー!
And finally, the 3rd birdhouse is at the front of the house, right outside the new reading nook in the entrance hall. Looks a bit nippy right now (!), but hopefully some little birds will find it useful in the spring.
<< Wood stove 薪ストーブ #2 2021-03-25 | Making a deck 人工木材デッキ #1 >> 2021-03-31 |
E-bike conversion DIYで電動自転車を作った!
$200 Underfloor heating 2万円でDIY床暖房
3D-printed OPEN/ CLOSED sign アトリエ看板作成
Painting the house! 家を自分でペイントした!
Designing a chandelier シャンデリアのデザイン